Warning light use and type
Date:2020-07-04 Click:532 Source:Zhejiang Gaoqiao Electronics Co., Ltd.
Type: Under normal circumstances, the warning light can provide products of various lengths according to the type and use of the vehicle. It has a structure with a combination of lampshades. When needed, the lampshade in one direction can be combined with a composite color.
The appearance characteristics of the warning light device can be divided into: combined long-row warning lights, combined tower-shaped warning lights, small types of warning lights, etc.
The following is a brief introduction for us. . . . . . LED rotating warning light:
LED rotating warning light: widely used in factories, workshops, iron and steel metallurgy, telecommunications towers, lifting machinery, engineering machinery, ports and docks, transportation, wind power generation, with sound and light alarm function, buzzer sound, full volume, strong warning, There is a sound switch at the bottom that can be independently controlled. The housing has excellent light transmission, impact resistance, and ultraviolet radiation resistance. This model uses wire-connected power generation. It is used for long-term full load use. Safe centering.
Some style installation methods
1. The warning light is divided into positive and negative poles, the positive pole is connected to the 58 port, and the negative pole is connected to the screw, otherwise it will not shine.
2. The correct connection method of the long row of warning lights is: the red line of the megaphone is connected to the input of the engine, the positive black line is connected to the negative input of the engine, and the normal flashing method: the yellow line and the white line should be connected to shine, and then the blue line is connected to the speaker horn , The male and female busbars are connected to the control flash module.
3. The general connection method of small warning lights is that the red line corresponds to the positive electrode of the battery and the black line corresponds to the battery.
4. Solar warning lights are generally taken out of the solar panel, and the fixing bracket and the solar panel are fixed together with rivets; the solar panel bracket and the solar panel base are fixed with screws; the connection line under the warning flashing light and the wiring of the solar panel are fixed Box connection; fix the solar panel with the bracket on the screw above the slow flashing light, open the warning flashing light frame, plug in the power plug; fix the hoop on the post; adjust the orientation of the solar panel, and then fix the screw; solar The board is oriented 45 degrees south.